Por favor, use este identificador para citar o enlazar este ítem: http://dspace.unach.edu.ec/handle/51000/9081
Título : Obtención de cuero tipo vestimenta lavable utilizando el polímero zetestan-gf durante el proceso de curtiembre en la empresa cueros “El Al-ce
Autor : Sebastián, Guerrero
Herrera Alvarado, Luis Enrique
Puente Santillán, Andrea Catalina
Palabras clave : Piel
cuero lavable
polímero Zetestan
curtiembre
Fecha de publicación : 17-may-2022
Editorial : Universidad Nocional de Chimborazo
Citación : Herrera Alvarado Luis, Puente Santillán A (2022) Obtención de cuero tipo vestimenta lavable utilizando el polímero zetestan-gf durante el proceso de curtiembre en la empresa cueros “El Al-ce (Tesis de pregrado)Universidad Nacional de Chimborazo, Riobamba, Ecuador
Resumen : RESUMEN El presente trabajo tuvo como objetivo, obtener cuero tipo vestimenta lavable utilizando el polímero Zetestan-Gf durante el proceso de curtiembre en la empresa cueros EL AL-CE, ubicados en el cantón Guano, provincia de Chimborazo. Para este experimento el cuero fue sometido a un proceso estándar de curtición, con variaciones en la etapa de neutralización donde se utilizaron diferentes polímeros como; (Engrasante ZETESTAN-GF) T2. Acabados: (agua, FIN TEX BLACK S, 697 RE, FILLER SPECIAL 58, UH LINK 35, UH WATERFIX 08 SH, UH WATERFIX 76 MATT, AZIRIDINA, AF 680): T2, posterior a la obtención del cuero se procedió a comparar los diferentes tratamientos aplicados con un tratamiento de control T1 (cuero napa, con tres tipos de engrasantes: grasa sulfitada, grasa sintética y alcohol grasa. Acabados: compacto, pigmentos, penetrante, estuco, agua, hidrolaca, agua, tacto, complejo metálico). La cantidad requerida de cuero para las 3 repeticiones del experimento fue de 24 unidades, obteniendo la materia prima suficiente para realizar los análisis físico-mecánicos. Para el análisis estadístico de los datos se utilizó el programa SPCS versión 2020, seleccionando el método ANOVA. El análisis de diferencia de medias fue realizado con la prueba Tukey (P< 0,05). Los resultados que se obtuvieron en la valoración de las resistencias físicas del cuero tipo vestimenta lavable utilizando el polímero Zetestan-Gf durante el proceso de curtiembre, registra respuestas más altas en cueros sin aplicación de polímero Zetestan G-f, específicamente para la suavidad, resistencia a la tensión y porcentaje de elongación, lo que permite conseguir un cuero con mejores características destinado para la confección de vestimenta. Se recomienda, realizar otras investigaciones referentes al uso de polímero Zetestan G-f, en la curtición de cueros, para conseguir estandarizar la calidad del material, logrando que el consumidor obtenga un producto que no se deteriore fácilmente.
Descripción : ABSTRACT: The objective of this work was to obtain washable clothing-type leather using the ZetestanGf polymer during the tanning process at the EL AL-CE leather company, located in the Guano canton, Chimborazo province. For this experiment, the leather was subjected to a standard tanning process, with variations in the neutralization stage where different polymers were used, such as; (ZETESTAN-GF fatliquor: T2. Finishes: water, FIN TEX BLACK S, 697 RE, FILLER SPECIAL 58, UH LINK 35, UH WATER FIX 08 SH, UH WATER FIX 76 MATT, AZIRIDINE, AF 680): T2, after obtaining the leather, the different treatments applied were compared with a control treatment T1 (nappa leather, with three types of fatliquors: sulfated fat, synthetic fat and fatty alcohol. Finishes: compact, pigments, penetrating, stucco, water, hydrolacquer, water, touch, metallic complex). The required amount of leather for the three repetitions of the experiment was 24 units, obtaining enough raw material to carry out the physical-mechanical analyses. The data tabulation was performed in the Microsoft Excel 2010 program. For the statistical analysis of the data, the SPCS version 2020 program was used, selecting the ANOVA method. The mean difference analysis was performed with the Tukey or Bonferroni test (P<0.05). The results obtained in the evaluation of the physical resistance of washable clothing type leather using the ZetestanGf polymer during the tanning process register higher responses in leathers without the application of Zetestan Gf polymer, specifically for softness, resistance to tension and percentage of elongation, which allows obtaining a leather with better characteristics destined for the manufacture of clothing. It is recommended to carry out other investigations regarding the use of polymer Zetestan G-f in the tanning of leather to standardize the quality of the material, ensuring that the consumer obtains a product that does not deteriorate quickly. Keywords: Leather, washable leather, Zetestan-Gf polymer, tannery, clothing
URI : http://dspace.unach.edu.ec/handle/51000/9081
ISSN : UNACH-IN-IND
Aparece en las colecciones: Tesis - Ingeniería Agroindustrial



Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.