Por favor, use este identificador para citar o enlazar este ítem: http://dspace.unach.edu.ec/handle/51000/3546
Título : “Diseño del sistema para el abastecimiento del agua potable de la comunidad de Mangacuzana, canton Cañar, provincia de cañar
Autor : Guaman Chuma, juan Antonio
Taris Tandalla, Milton Fabian
Palabras clave : Abastecimiento
Agua potable
Fecha de publicación : 2017
Editorial : Universidad Nacional de Chimborazo,2017
Citación : Facultad de Ingeniería.
Resumen : El presente proyecto de graduación titulado “DISEÑO DEL SISTEMA PARA EL ABASTECIMIENTO DEL AGUA POTABLE DE LA COMUNIDAD DE MANGACUZANA, CANTON CAÑAR, PROVINCIA DE CAÑAR” consiste en realizar el diseño del sistema para el abastecimiento de agua potable, que cumpla con los parámetros estipulados en las Normas de Diseño, especificaciones técnicas y ambientales vigentes, de esta forma mejorar las condiciones de vida de los habitantes del área de proyecto, ya que en la actualidad no cuentan con un sistema eficiente técnicamente diseñado. La metodología de investigación se realizó en el campo, con la socialización y recopilación de información socio económico mediante encuestas, topografía de la zona, toma de muestras de agua para su análisis físico, químico, bacteriológico. En el trabajo de gabinete se efectuaron las siguientes actividades: Evaluación para sistematización social y económica a 72 familias con una población inicial total de 280 habitantes, la vida útil del sistema se diseñó para 25 años teniendo así una población final de 365 habitantes. El procesamiento de datos topográficos se realizó mediante el software Civil 3D; en lo referente a diseños y cálculos el sistema será captado e impulsado por medio de una estación de bombeo al tanque de almacenamiento de 15 m3 ubicado en la cota más alta de la comunidad, para su posterior distribución mediante red abierta, a gravedad, con tubería PVC de distintos diámetros. Todos los resultados fueron convalidados con el software computacional EPANET ideal para modelación hidráulica cumpliendo con presiones, velocidades máximas y mínimas determinadas en la “NORMA DE DISEÑO DE SISTEMA DE AGUA POTABLE, Y ELIMINACIÓN DE RESIDUOS LÍQUIDOS PARA POBLACIONES DE MAS DE 1000 HABITANTES Y LOCALIDADES DE MENOS DE 1000 HABITANTES DE ECUADOR”. El trabajo se complementó cálculo de volúmenes de obra, análisis de precios unitarios, presupuesto referencial, cronograma valorado de la obra, especificaciones técnicas, planos de diseño y plan de manejo ambiental.
Descripción : The present graduation project entitled "DESIGN OF THE SYSTEM FOR THE SUPPLY OF DRINKING WATER OF THE MANGACUZANA COMMUNITY, CANTON CAÑAR, PROVINCE OF CAÑAR" consists to carry out the design of the system for the supply of drinking water complying with the standards parameters stipulated in the design in force, technical and environmental specification, thus improving the living conditions of the population of the project area, since currently they do not have an efficient system technically designed. The methodology of this research was carried out in the field, with the socialization and compilation of socio-economic information through surveys, the topography of the area, a sampling of water for physical, chemical and bacteriological analysis. In the work of the cabinet, the following activities were carried out: Evaluation for social and economic systematization to 72 families with a total initial population of 280 inhabitants, the useful life of the system was designed for 25 years thus having a final population of 365 inhabitants. Topographic data processing was done using Civil 3D software; In terms of designs and calculations the system will be captured and driven by pumping from the station to the storage tank of 15 m3 located at the highest level of the community, for its later distribution through open network, with gravity, with pipe PVC of different diameters. All the results were validated with the EPANET computer software ideal for hydraulic modeling, complying with pressures, maximum speeds and minimums determined in the "DESIGN STANDARD OF DRINKING WATER SYSTEM, AND DISPOSAL OF LIQUID WASTE FOR POPULATIONS OF MORE THAN 1000 INHABITANTS AND LESS THAN 1000 INHABITANTS OF ECUADOR”. The work was complemented by calculation of volumes of work, analysis of unit prices, reference budget, valued work schedule, technical specifications, design and an environmental management plan.
URI : http://dspace.unach.edu.ec/handle/51000/3546
ISSN : ING-CIVIL
Aparece en las colecciones: Tesis - Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UNACH-EC-ING-CIVIL-2017-0007.pdf13,91 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons